AOOSTAR WTR R7 PRO New DIY NAS Metal Shell Mini PC with 6 HDD bays, 6 NVMe slots,10 GbE Ethernet port,2 x 2.5 GbE Ethernet ports,LED screen and a Ryzen 7 5800U processor

AOOSTAR WTR R7 PRO Nova DIY NAS Metal Shell Mini-komputilo kun 6 HDD-lokoj, 6 NVMe-fendoj, 10 GbE Ethernet-haveno, 2 x 2.5 GbE-Eterreto-havenoj, LED-ekrano kaj Ryzen 7 5800U-procesoro

Pro nekontroleblaj faktoroj, la 6 Bay NAS estos prokrastita por antaŭvendo. La originala plano estis meti AMD Ryzen 7 5800U-pantabulojn sur ĉi tiun NAS, sed la kompanio decidis forlasi la originan planon kaj anstataŭigi ĝin per AMD Ryen 7000-seriaj CPUoj, bonvolu atendi nian ĝisdatigon por vidi kiuj CPUoj estas disponeblaj. 😫 😩


  • CPU: AMD Ryzen 7? CPU
  • 6 x 2.5/3.5 coloj malmola disko golfoj
  • 6 x fendoj por PCIe NVMe SSD-oj
  • 2 x 10 GbE Ethernet-haveno
  • 2 x 2.5 GbE Ethernet-havenoj
  • 1 x DP
  • 1 x HDMI
  • Subtenu U.2
  • Metala kazo
  • LED-ekrano: povas reflekti maŝinan temperaturon, GPU-procenton, ktp.

Por pliaj detaloj, bonvolu atendi, ke ni faru la teston, ni alŝutos la detalbildojn sur la oficiala retejo.

Bonvenon aliĝi al la oficiala AOOSTAR fejsbuka diskutgrupo, kie vi povas akiri la plej novajn informojn pri novaj produktoj kaj diskuti ajnan solvon pri AOOSTAR-produktoj.

Bonvenon al la oficiala AOOSTAR-discord-servilo:

Reen al blogo

13 komentojn

Is there a time frame for this? We’re two months past when it was going to be out and I have to start my next build.

Rob Allen

What I’m looking for is :
- 10 gbit/s network (check)
- at least 6 2.5 slots (check)
- at least 1 M.2 slot (check
- really efficient CPU with best compute per watt ratio (and tdp below 30 watt) (to be seen)
- at least 32 GB of RAM (check)
- Integrated graphics (to be seen, probably also a check)

Use case : building a low power Proxmox server on which I can make freeNAS run with disk passthrough
I don’t care for hardware transcoding, I have a small N100 mini PC for my plex needs (and this mini PC gets everything by SMB from the NAS)

Anyway according to the future CPU you guys are going to put in this, it looks like a perfect match, hope to be able to buy it soon !


“Main purpose of such a device. Home Media Center with Hardware-Transcoding. So why the hell is there a AMD and not a Intel-CPU??? "

No, it says it is a NAS, not a home media center. I would not buy an Intel driven device, they are too expensive and not trustworthy. AMD is the way to go.

“But overall a great idea that goes in the right direction.”

Only very little with too much . It tries to do “all” for a NAS and that makes the product more complex than needed and rises the costs. Remove the 3.5" slots and make it much smaller, more compact and better against heat development of harddrives. Then we can use 2.5" SATA SSDs and NVMes only. Put 8 NVMe ports inside instead of 6. And also remove the handbrake 2.5GBit ports or replace them with two additional 10GBit ports. 2.5GBit ports are unnecessary pricy and slow. See Asustor Flashtor 6 FS6706T which is crippled by 2.5GBit ports and Intel CPU.

Other than that: bring one version with NVMe AND 2.5" slots and one with NVMe only. I will buy both (if they come with powerful AMD processors like here, no Intel ones).

Danni Low

this NAS is very promising , it has all the connectivity for a high speed NAS, the only complain i have is the physical size , as an SSD nas it should be small , but i understand they wanted to increase their sales by including space for 3.5 inch hard drive bays , in my opinion they are just trying to compete with existing brands in this case and not differentiate themselves , A high performance NAS with a small size is still rare in 2023 , there are a handful of manufactures that offer it , this is a chance for Aoostar to make a device that can compete with all of the ones in the market. just reduce the size and make it portable but keep all the high performance specs , get rid of the 3.5 inch which will make it huge.


Why not the most recent R7 7735U instead??

Hugo Peixoto

lasu komenton